|
| View previous topic :: View next topic |
| Author |
Message |
uldis Site Admin
Joined: 27 Oct 2006 Posts: 6 Location: London, UK
|
Posted: Fri Jul 27, 2007 8:10 pm Post subject: Recovered: Full spec |
|
|
if anyone is interested then here's the full tchnical spec for IZh49:
Years of production: 1951-1958
Overall production: 507603
Engine: 10,5-11,5hp/3200rpm, aircooled 1-cyl., 2-stroke, 346cc, with aluminium head
Bore/Stroke: 72/85 mm
Compression ratio: ? : 1
Length: 2175 mm, width: 780 mm, height: 1000 mm
Wheelbase: ?
Road clearance: 120 mm
Box-type stamped frame, welded from two halves
Carburetter: K-28B
Centrifugal air filter
Clutch: multi-disk, in oil bath
Gearbox: 4-speed, both hand- and foot changed
Ratios: I - 4,32; II - 2,24; III - 1,4; IV - 1
Rear axle ratio: 5,06 : 1
Ignition: Battery, 6 Volt
Spark plugs type and dimensions: NA II/II, M14x1,25
Interrupter clearance: 0,4-0,6 mm
Chain
Brakes: drum-type
Weight without load: 162 kg
Engine weight: ?
Maximal speed: 90 km/h
Tyres: 3,25-19 inches
Tyre pressures (atmospheres): front - 1,5; rear - 1,8 (2,3 with passenger)
Fuel tank capacity: 13-14 Ltr.
Gearbox oil carter capacity: 1 Ltr
Petrol consumption: 4,5 Ltr./100km under 50-60 km/h in summer time
Fuel: petrol A-66 GOST 2084-51 with avtol 6-10 in proportion 20 : 1 for new engine, 25 : 1 used engine.
Ford passing depth: 300 mm
******************************
cockoo
Junior
Joined: 13 Mar 2007
Posts: 24
Location: Balvi, Latvia
Posted: Tue Mar 13, 2007 8:16 am Post subject:
--------------------------------------------------------------------------------
Compression ratio 6,6-7,0 : 1
http://www.overlocker.narod.ru/konfa/confa_one_cilinder.htm
Here is somethink. A very good page, but in Russian
http://www.overlocker.narod.ru |
|
| Back to top |
|
 |
PeterZ650 Junior Rider
Joined: 02 Aug 2007 Posts: 7 Location: Germany, near Cologne
|
Posted: Thu Apr 10, 2008 10:36 am Post subject: manuals and so on ... |
|
|
Hi,
I think, I am on of the persons in germany with the most
documents about Izh-49, but most of them in russian language
(and I do not speak russian ...)
So if anyone have some documents in english, please let me
know, no problem to make an exchange.
I am also interested on further (russian) documents
Peter |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|